







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The San Jose Owner’s Guide
If you have an ActiveYards driveway or paver system that’s failing, we stock and install ActiveYards-compatible replacement parts, with typical installed pricing in San Jose running $8,260 – $21,240 for a full paver driveway and $4,130 – $12,980 for a paver patio. Most homeowners discover the problem the same way: a paver has shifted out of place, a section of driveway is sagging, or the locking sand between units has washed out after a winter of rain. The good news is that ActiveYards systems are modular, which means individual sections can usually be repaired without tearing out the whole installation.
Which ActiveYards Models This Applies To
ActiveYards produces paver and driveway systems in several distinct lines, and the compatibility question comes down to paver thickness, base depth, and the edging profile originally installed. Most residential ActiveYards pavers run 60mm to 80mm thick, which matters because replacing a single 60mm paver with an 80mm paver will leave a lip that catches every shoe and wheel that crosses it. We identify the right part by measuring the existing paver’s thickness with a caliper and matching the color batch code stamped on the underside, not just the generic color name. ActiveYards color batches shift slightly year to year, and a paver from a different batch can look obviously wrong in direct sunlight. We always compare the stamped code before ordering. For OEM versus aftermarket: ActiveYards pavers use a specific joint spacing and surface texture that off-brand equivalents often fail to match. We recommend OEM pavers for any visible repair where color consistency matters, and quality aftermarket options only for subsurface work like base gravel or drainage layers where nothing shows.
Styles & brands we work with







Signs Your ActiveYards Driveway & Pavers Is Failing
- Pavers rocking underfoot. This almost always means the sand base underneath has eroded or compacted unevenly. The paver itself is usually fine; the problem is below it.
- Widening gaps between pavers. When locking sand washes out, pavers drift apart. Left alone, the joints fill with debris and weeds, and the drift accelerates each wet season.
- Pooling water after rain. A properly pitched paver surface drains within minutes. Standing water means the base has settled, and a low spot formed where the substrate (the compacted layer beneath the pavers) has shifted.
- Crumbling or cracked edge restraints. The plastic or aluminum edging that holds your ActiveYards driveway in place fails before the pavers do. Once the edge lets go, the outer pavers begin to spread and the whole system destabilizes.
- Sunken sections near driveways or downspouts. In San Jose’s clay-heavy soils, winter rains expand the ground and summer droughts shrink it. Sections near concentrated runoff settle faster than the rest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For ActiveYards driveway and paver work in San Jose, here’s what you can expect:
- Paver driveway installation (full): $8,260 – $21,240
- Paver patio installation: $4,130 – $12,980
- Spot repair / single section rebuild: typically $400 – $1,200 depending on square footage and base condition
- Locking sand refill and re-compaction: $295 – $700
What drives the range: total square footage, whether we’re replacing the base or salvaging it, access for equipment, and whether the existing pavers can be reused or need new matching pieces. Our written quote separates parts and labor so you see exactly what you’re paying for. Every repair includes our 365-Day Done Right Promise, which means if the work fails within the guarantee period, we come back and fix it at no charge. That’s in writing, on every job.
DIY or Call Us?
A homeowner can safely lift and reset a small number of loose pavers with a rubber mallet and fresh locking sand. That’s honest work, and if the base is still solid, it can buy you a year or two. Where DIY goes wrong is when the base has failed underneath. If you’re seeing sunken sections, spreading edges, or pavers that sink after every rain, adding sand on top just buries the problem. The substrate needs to be excavated, re-compacted, and re-pitched. Doing it wrong means the same failure comes back in six months, and you’ve spent two weekends finding that out. If you’d rather have a written number and a written guarantee before any work starts, call (669) 274-2362. Trevor Nash will walk the site with you and tell you straight what the repair needs and what it costs.
FAQs

A properly installed ActiveYards driveway in San Jose typically lasts 25 – 40 years for the pavers themselves, though the locking sand needs replenishing every 3 – 5 years and the edge restraints may need replacement after 15 – 20 years. The base is what usually fails first, not the pavers. Call (669) 274-2362 if you’d like us to assess yours, estimates are free.
Yes, in most cases we can lift and reset individual pavers or rebuild a small section without touching the rest of the installation. The exception is when the base has shifted under a large area, in which case spot repairs won’t hold. Call (669) 274-2362 for an exact assessment.
A small spot repair usually takes one day. A full paver driveway replacement in San Jose typically runs 3 – 7 days depending on square footage and base work. We’ll give you a defined arrival window and a written completion date before we start.
We keep common ActiveYards-compatible edging, base materials, and locking sand on the truck, and we order color-matched pavers with the batch code verified against your existing installation. We also stock parts for other brands we work with, including KraftMaid, Cambria, and Silestone. Call (669) 274-2362 and we’ll confirm availability before your estimate.
Written by Trevor Nash, Owner, Penhallow Remodeling San Jose at Penhallow Remodeling San Jose, serving San Jose and nearby areas.


