A Penhallow company - serving San Jose, CA
An open living room and dining area after a whole-home remodel

Mr-Glass Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in San Jose
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A walk-in shower with large-format tile and a built-in niche
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Mr-Glass Fence Installation: The San Jose Owner’s Guide

Mr-Glass fence installation in San Jose typically runs $4,130 to $10,620 for a full perimeter job, including all panels, posts, hardware, and labor. We stock Mr-Glass-compatible fence components on our trucks and can have most installations measured, quoted in writing, and scheduled within a few days of your call. Most San Jose homeowners discover their fence has failed the hard way: a gate that suddenly drags, a panel that cracks at the post line after a winter storm, or glass that’s fogged between panes from a failed seal. What looked like a cosmetic issue is usually a structural one underneath. We’ll tell you which it is before you spend a dollar.

Call (669) 274-2362

Which Mr-Glass Models This Applies To

A remodeled living room with built-in shelves around the fireplace

Mr-Glass fence systems in the San Jose market come in three main configurations: frameless glass panel runs, semi-frameless with vertical posts, and fully framed panels with aluminum or steel surrounds. The compatibility issue we see most often is homeowners buying a generic glass panel online and discovering the pre-drilled hole spacing doesn’t match their Mr-Glass post hardware. Mr-Glass posts use a proprietary clamp system with a 1.5-inch receiver channel; generic panels drilled at 1.25 inches will not seat correctly no matter how much you tighten the clamp. If you’re not sure which series you have, check the post cap. Mr-Glass stamps a four-digit series code on the underside of the cap, usually starting with 3 or 7. We can match any series code to the correct panel thickness, clamp style, and mounting base. For OEM versus aftermarket: Mr-Glass OEM panels carry a 10-year seal warranty and are worth the extra 15 to 20 percent if the panel faces direct afternoon sun. Aftermarket tempered glass of the same thickness performs fine for shaded or interior-facing runs, and we’re happy to quote both so you can see the actual difference in writing.

One more thing worth knowing: Mr-Glass fence systems sold in California are built to the state’s tempered-glass safety standard, which means the panels are heat-treated to shatter into small cubes rather than sharp shards. That’s not a marketing detail. It’s a code requirement, and it matters if you’re replacing a panel that was installed before the standard tightened.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Mr-Glass Fence Installation Is Failing

  • Gate sag or drag at the latch side. The hinge post has shifted, usually because the concrete footing wasn’t poured deep enough for San Jose’s expansive clay soil. When the ground swells in wet winters and contracts in summer, shallow footings move, and the gate is the first thing to complain.
  • Glass panel fogging or moisture between panes. The insulating seal has failed. Once moisture gets in, the panel will not clear up on its own. You’re looking at panel replacement, not repair, and the longer you wait the more likely the frame channel starts corroding from trapped water.
  • Cracks radiating from a clamp point. The clamp was overtightened during original installation or the panel was cut slightly oversized, putting constant stress on the glass. San Jose’s temperature swings expand and contract the metal hardware enough that a stress crack will spread within one season.
  • Rust staining running down from post caps or base plates. The powder coat has worn through. On Mr-Glass systems, this usually means the original installer scratched the coating during assembly. In San Jose’s dry climate it progresses slowly, but once rust starts it won’t stop without a strip-and-recoat or post replacement.
  • Wobble when you push on a panel. The rubber gasket inside the clamp has compressed and hardened, which happens naturally after eight to ten years. The glass is still fine, but the hardware is no longer gripping it. This is the cheapest fix we do, and it’s also the most common issue we find on fences that are otherwise in good shape.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

A complete Mr-Glass fence installation in San Jose runs $4,130 to $10,620. The range comes down to three things: total linear footage, whether you’re replacing panels only or panels plus posts, and site access. A 40-foot run with good access and existing sound posts starts around $4,130. A larger perimeter or one where we’re pulling and replacing footings moves toward the top of the range. Every quote includes the panels, hardware, post bases or new footings if needed, debris haul-away, and a written workmanship guarantee. We don’t do verbal ballparks. You get a written price before any work starts, and that number is the number on the invoice. The Kingswell standard behind that is simple: a written price up front, a real arrival window, and a 365-day promise to make it right. Give me the real problem and I’ll give you the real number.

Cost breakdown for a typical 40-foot Mr-Glass fence run in San Jose:

  • Glass panels (tempered, code-compliant): $2,100 to $4,300
  • Post hardware and clamps (OEM or equivalent): $850 to $1,900
  • Footing repair or replacement where needed: $400 to $1,500
  • Labor including tear-out and haul-away: $780 to $2,900
  • Total installed: $4,130 to $10,620

One thing that separates us from the guy who gives you a number over the phone and changes it at the door: our price is written and fixed before we start. You’ll know the panel brand, the hardware spec, and the labor hours. If something comes up mid-job, we talk to you before touching anything that changes the number.

DIY or Call Us?

Glass fence work sits in a gray zone. Replacing a single undamaged panel by swapping it into existing clamps is doable if you’ve got a second set of hands and the old panel lifts free. But tempered glass is unforgiving: one chip on a concrete edge and the whole panel grenades into thousands of cubes. If the post is out of level, you’ll fight it all afternoon and still have a wobble. If the footing is cracked or sunken, no amount of shimming fixes it. And lifting a 6-by-4 piece of tempered glass in a stiff San Jose breeze is exactly how panels get dropped. We’ve replaced more than one fence where the homeowner got the panel home safely and lost it during the lift. We’d rather save you that. If you want to check things yourself first, walk the line and mark every clamp that’s loose, every post that moves when you push it, and every panel with visible clouding. Call (669) 274-2362 with that list and we’ll give you a straight answer on what’s urgent and what can wait.

FAQs

A built-in window seat in a bay window

Getting started with Penhallow in San Jose

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your San Jose team

A local crew that works across San Jose and the towns around it, to the same written standard as every Penhallow location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Jose? Licensed & insured · Free on-site estimates response · free estimates
Call (669) 274-2362
Local Service Coverage

Request a Free Estimate in San Jose

Tell us what you need - Penhallow Remodeling San Jose responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and agree that you may be contacted by telephone, text message, or email about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch